System information

User's Manual Chapter 4 Configuring Typical Applications
RADview-SC/TDMoIP IPmux-11 Creating Circuits 4-15
Defining the E1 Parameters

To configure the E1 parameters for the source IPmux-14:
1. Double click on the desired IPmux-11 source (172.17.157.11) in the Central
Site (
Figure 4-14).
The Element Manager appears.
Figure 4-15. IPmux-14 Element Manager
2. Select CH1.
3. From the Configuration menu, select Parameters...
The Interface Parameters dialog box appears (
Figure 4-6).
4. Select the following parameters:
 Transmit Clock Source = Adaptive
 Line Type = Framed-CRC.
5. Click <Set>.