System information

RADview-SC/TDMoIP IPmux-11 Configuring the IPmux-11 and IPmux-14 Units 4-1
Chapter 4
Configuring Typical
Applications
This chapter provides detailed instructions for setting up a typical application using
two IPmux units, and contains the following sections:
• Configuring the IPmux-11 and IPmux-14 Units
 Configuring the Host IP Parameters
 Configuring the Manager List
• Connecting IPmux-11 to the Management Station
• Configuration Sequence
• Creating Circuits
 Creating a Mesh Service Circuit
 Defining the E1 Parameters
 Creating a Circuit
 Saving the Circuit Parameters
 Displaying the Circuit Parameters
 Creating a Normal Service Circuit
 Defining the E1 Parameters
 Creating a Circuit
 Saving the Circuit Parameters
 Displaying the Circuit Parameters
This chapter provides detailed instructions for configuring an IPmux-11 unit
operating opposite an IPmux-14 unit (see
Figure 4-1).
IPmux-14
Loopback Clock
172.17.157.14
IPmux-11
Adaptive Clock
172.17.157.11
PBX
Receive Clock
PBX
Internal Clock
E1E1
Network
Management
Station
Ethernet
Switch
172.17.10.100
Figure 4-1. IPmux-11, IPmux-14 Units Operating Opposite Each Other