System information

Chapter 3 Configuration Management User's Manual
3-20 Setting the Operational Parameters RADview-SC/TDMoIP IPmux-11

To select an available timeslot:
1. Select a bundle from the Bundles Table and click Edit…
2. Click the square beneath the timeslot number.
Selected timeslots appear yellow.
3. Click <Apply>.

To select all available timeslots for the selected bundle:
• Click <Select All>.

To remove all selected timeslots from the selected bundle:
• Click <Clear All>.
You cannot edit a bundle that has already been used to define a connection in the
Bundle Connection Table (
Figure 3-17). To edit such a bundle, first delete the
bundle from the Bundle Connection Table (
Figure 3-17), and then return to the
Bundles Table to select new parameters.
Managing Bundle Connections
Bundles are groups of timeslots. The Bundle Connection Table command displays
the detailed technical parameters of each bundle in the system. Although you can
use the Element Manager to view the bundle connections and to remove them,
complete management of bundle connections is accomplished using the Service
Center map. For information on managing bundle connections using the Service
Center map, refer to Chapter 5 of the RADview SC/TDMoIP System Manual.
Creating Bundle Connections
For information on creating and managing bundle connections using the Service
Center map, refer to Chapter 5 of the RADview SC/TDMoIP System Manual. For
examples, see Creating Circuits, in Chapter 4 of this manual.
Removing Bundle Connections
For information on removing bundle connections using the Service Center map,
refer to Chapter 5of the RADview SC/TDMoIP System Manual. In cases where a
circuit is broken, you may use the Bundle Connection Table to manually remove a
bundle connection.

To display the bundle connection table:
• Select Configuration > Bundle Connection Table…
The Bundle Connection Table appears.
Note