System information

User's Manual Chapter 3 Configuration Management
RADview-SC/TDMoIP IPmux-11 Setting the Operational Parameters 3-19
The Bundles command enables you to assign timeslots to bundles, and to remove
the timeslot assignments from bundles.

To view bundles for an E1/T1 port:
1. Click an E1/T1 port.
2. Select Configuration > Bundles...
The Bundles Table appears.
Figure 3-15. Bundles Table – Port Level
Table 3-10. Bundle Table Parameters – Port Level
Parameter Possible Values/Remarks
Bundle No. Bundle Number
Bundle Name Name of the selected bundle
Empty Bundle When checked, indicates the bundle has not been assigned to any TSs (timeslots)
Bundle Status Status of the bundle
Connected, Disabled, Remote Fail, Local Fail, Unavailable, Validation Fail,
Sequence Error, Buffer Underflow, Buffer Overflow
Time Slots The timeslots and the bundles assigned to them.
Timeslots with bundles assigned to them are marked with a dark blue box, while
unassigned timeslots are marked with a gray box. A T1 port has 24 timeslots that can be
assigned to a bundle; an E1 port has 31 (without MF) or 30 (with MF).