System information

Chapter 3 Configuration Management User's Manual
3-14 Setting the Operational Parameters RADview-SC/TDMoIP IPmux-11
3.2 Setting the Operational Parameters
Configuring IPmux-11 Ports at the Physical Layer
Configuring the E1/T1 Ports
The E1/T1 Interface Parameters command enables you to configure the various
parameters of the E1/T1 port (the port’s software configuration). The parameters
vary according to the port type.

To display or configure E1/T1 parameters:
1. Click an E1/T1 port.
2. Select Configuration > Parameters...
The E1 or T1 Interface Parameters dialog box appears (see
Figure 3-12 and
Figure 3-13).
Figure 3-12. E1 Interface Parameters Dialog Box