System information

User's Manual Chapter 3 Configuration Management
RADview-SC/TDMoIP IPmux-11 Setting the System Parameters 3-11
You have the following options:
• Add – Add a new entry to the table
• Remove – Remove an entry to the table
• Remove All – Remove an entry to the table

To add a new entry:
1. Click Add.
The Static MAC Table: Add Entry dialog box appears (see
Figure 3-9).
2. Configure the desired parameters. The Add Entry parameters are the same as
the parameters for the Static Mac Table (see
Table 3-6).
3. Click Apply.
The new entry is added to the table.
4. Click Close.
The Add Entry dialog closes and the Static MAC Table dialog box displays
the updated table.
Figure 3-9. Static MAC Table: Add Entry Dialog Box

To remove entries:
1. Select the rows of entries you wish to remove from the table.
2. Click Remove.
A confirmation message appears.
3. Click OK.
The entries are removed from the table.

To remove all entries from the Static MAC Table:
1. Click Remove All.
A confirmation message appears.
2. Click OK.
All of the entries are removed from the table.