System information

Chapter 3 Configuration Management User's Manual
3-6 Setting the System Parameters RADview-SC/TDMoIP IPmux-11
Table 3-3. Add Manager Parameters
Parameter Possible Values/Remarks
Host Name LAN1
Manager IP Address IP address of the NMS
Access Ports Defines from which port this manager can configure the device. Values differ
according to the ports combination.
All
VLAN
VLAN Tagging Yes, No
VLAN ID 1...4094
VLAN Priority 0..7
Mask Traps
None When checked, disables the other Mask Trap options.
Link Up/Link Down Yes (checked), No (unchecked)
Alarm Status When checked, the trap is enabled.

To change an entry in the Manager List:
1. Select an entry in the Manager List and click <Change…>
The Change Manager dialog box appears (
Figure 3-5).
2. Change the desired parameters.
3. Click <Set> to implement the changes.
Figure 3-5. Change Manager Dialog Box