System information

User's Manual Chapter 3 Configuration Management
RADview-SC/TDMoIP IPmux-11 Setting the System Parameters 3-5
Table 3-2. Manager List Parameters
Parameter Possible Values/Remarks
Host Name LAN1
Manager IP Address IP address of the Network Management System
Mask Traps Indicates whether or not traps are masked by the system.
Yes, No
Access Ports Defines from which port this manager can configure the device. Values differ according
to the ports combination.
Network
User1
User2
All
VLAN Tagging Yes, No
VLAN ID 1..4094
VLAN Priority 0..7

To add an entry to the manager list:
1. In the Manager List, click <Add...>
The Add Manager dialog box appears (
Figure 3-4).
2. Enter the required settings.
3. Click <Set> to implement the changes.
This option is not available if there are already ten managers.
Figure 3-4. Add Manager Dialog Box
Note