Specifications

Appendix D CM-2 Management Commands LRS-24 Installation and Operation Manual

D-38 Displaying Alarms Log

D.16 Displaying Alarms Log

Purpose

Displays the contents of the alarm history buffer of the CM-2 module, or of other

selected I/O module. This buffer contains the last 20 alarms and events (for

example, module insertion/removal).

The alarm log is cleared automatically when LRS-24 is turned off.

Format

NODE nn DSP LOG

Procedure

➤ To display the desired log:

• Type: DSP nn DSP LOG <Enter>.

nn stands for the node number of the desired module, in the range of

1 through 12.

The log of the specified module appears.

The contents of the form depend on the module type. Refer to the Installation and

Operation Manual of the corresponding module for detailed information.

A typical alarm display for the hub log, displayed in response to a request

addressed to the CM-2 module (node 13), is shown in Figure D-41.

MODEM LOG FILE

MODEM NAME: ASMI-31CQ(m)

DEFINE PORT NUMBER : 1

SELECT MODEM : MODEM 1 LOCAL

CODE STATE DESCRIPTION TIME DATE

12 OFF NearEndMngLinkFail 09:01 2000-03-09

08 OFF NearEndSyncLoss 09:01 2000-03-09

12 ON NearEndSyncLoss 09:01 2000-03-09

THERE ARE NO MORE PAGES AT THE MOMENT

Figure D-41. Hub Log File Screen

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610