Specifications

Preface
Foreword
This manual provides information on the technical characteristics, installation and operating
instructions of FOMi-E1/T1. The manual contains the following information:
Chapter 1. Introduction
Describes the FOMi-E1/T1, the versions available, features and options. Briefly
describes the Front Panel, LEDs, jumpers, connectors and fuses. This chapter also
provides a basic functional description of the FCD-T1 and a short description of some
of the main operations and options.
Chapter 2. Installation
Explains how to install the FOMi-E1/T1. Explains how to perform all the connections
needed to setup the FOMi-E1/T1. Explains how to set the jumpers and switches.
Chapter 3. Operation
Describes the controls, indicators and functions of the FOMi-E1/T1. Explains how to
operate the FOMi-E1/T1.
Chapter 4. Troubleshooting
Describes the diagnostic tests provided by the FOMi-E1/T1. Explains how to operate
the Internal BER Tester and Pattern Generator. Explains the various alarms and real
time messages that may be encountered. Outlines trobleshooting procedures.
Chapter 5. Sample Application
This chapter illustrates the configuration and setup of a typical application of the
FOMi-E1/T1.
Conventions
Note
A note draws attention to a general rule for a procedure, or to
exceptions to a rule.
Caution
A caution warns of possible damage to the equipment if a
procedure is not followed correctly.
Warning
A warning alerts to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the equipment. If these instructions are not
followed exactly, possible bodily injury may occur.