Specifications

FOMi-E1/T1 Installation & Operation Manual Chapter 4. Troubleshooting & Diagnostics
Diagnostic Tests 4-13
8. Use the SCROLL button to toggle to ON.
9. To start the LEDS CHECK, press the ENTER button.
The message WAIT... is displayed on the local modem LCD, and then an
asterisk appears next to the ON indication.
All the LEDs on the front panel should light. If management is inactive, the
LOC CONFIG ONLY message will appear on the LCD.
10. A few seconds after completion of the check the LEDs will turn off.
11. To stop the test, press the SCROLL button until OFF is displayed and
then press the ENTER button.
The message WAIT... is displayed on the local modem LCD and the test
is terminated.