Specifications

Chapter 4. Troubleshooting & Diagnostics FOMi-E1/T1 Installation & Operation Manual
4-6 Diagnostic Tests
Figure 4-2 Local FOMi-E1/T1 in Analog Loopback (LLB)
➤
➤ ➤
➤
To perform a Local Analog Loopback test:
1. Press the CURSOR button to move to the Menu Type field.
2. Press the SCROLL button until Tests is displayed.
3. Press the CURSOR button to move to the LOC/REM field.
4. Press the SCROLL button to select the local modem or the remote
modem.
5. Press the CURSOR button to move to the Menu Options field.
6. Press the SCROLL button until LLB is displayed.
7. Press the CURSOR button to move to the Parameters field.
8. Use the SCROLL button to toggle to ON.
9. To start the LLB test, press the ENTER button.
The message WAIT... is displayed on the local modem LCD, and then an
asterisk appears next to the ON indication.