Specifications

Chapter 3. Operation FOMi-E1/T1 Installation and Operation Manual
3-10 Operating Procedures
➤
➤ ➤
➤ To set the AIS
1. Press CURSOR to move to the Menu Type field.
2. Press SCROLL until DTE CONFIG is displayed.
AIS is displayed in the Menu Options field.
3. Press CURSOR to move to the LOC/REM field.
4. Press SCROLL to select the local modem or the remote modem.
5. Press CURSOR to move to the Parameters field.
6. Use SCROLL to toggle between ENABLE and DISABLE.
7. Press the ENTER button to set your choice.
REM
AIS
DTE CONFIG
ENABLE
STATUS
TESTS
LINE CONFIG
DTE CONFIG
ALARM BUFFER
ENABLE
DISABLE
Figure 3-8 DTE Config Parameters Configuration
TESTS
The TESTS menu provides the capability for executing several diagnostic
tests on the local and remote modems. For more details, refer to Chapter
4.