Specifications

FOMi-E1/T1 Installation and Operation Manual Chapter 3. Operation
Operating Procedures 3-7
Table 3-3 STATUS Menu Options
Menu Options Indicates Parameter Values Description
Interface
Current electrical
interface
G.703 G.703-E1 (2048 Kbps), or
G.703-T1 (1544 Kbps)
Bit Rate
Line Bit Rate 2048 kbps
1544 kbps
Cable
Electrical interface rate 75
120
100
E1 75Ω unbalanced, 120Ω
balanced;
T1 100Ω balanced
FO Interface
SC85
ST85
FC85
SC13
ST13
FC13
SC13L
ST13L
FC13L
SC15L
FC15L
ST15L
SC, ST, FC optical
connectors:
Infrared LED at 850 nm
Infrared LED at 1300 nm
Laser diode at 1300 nm
Laser diode at 1550 nm
REM. M
This option is displayed
only if management is
active.
FOM-E1/T1
NEW
Displays the far end
modem type.
Tests
Current diagnostic status NONE
LLB
RLB
RLB + BERT
BERT
LED Test
See Chapter 4 for more
information on FOMi-E1/T1
diagnostic tests.
➤
➤ ➤
➤ To view modem configuration
1. Press the ENTER button to move to the Menu Type field.
2. Press the ENTER button until STATUS is displayed.
3. Press the ENTER button to move to the LOC/REM field.
4. Press the ENTER button to toggle between local modem and remote
modem (if management is not active, the remote modem will not be
displayed).
5. Press the ENTER button to move to the Menu Options field.
6. Press the ENTER button to scroll through the menu options to view the
desired options; see Figure 3-6 and Table 3-3 for STATUS options.