Specifications

FOMi-E1/T1 Installation & Operation Manual Chapter 2. Installation & Setup
Initial Operation and Basic Checks 2-7
2.5 Initial Operation and Basic Checks
Power-On
Procedure
FOMi-E1/T1 is turned on as soon as power is connected. When power is
connected, the PWR LED lights up to indicate that the FOMi-E1/T1 is on.
When the unit is powered ON, operating personnel are not exposed to
voltage in excess of 30 volts on any card or accessible area of the DC
power supply.
Normal
Operating
Indications
Table 2-1 lists the correct status of the indicators, a few seconds after
power-up.
Table 2-2 FOMi-E1/T1 Indicator Status
Indicator Status
PWR ON
LCD Display Displays opening screen:
“FOMi-E1/T1 REV X.X
I N I T I A L I Z I N G...”
ERR ON (“SYNC-LOSS” always occurs during power-up)
Test OFF
Power-Off
Procedure
FOMi-E1/T1 is turned off by disconnecting its power. Always disconnect the power
cord from the mains outlet first.