Specifications

Chapter 3 Operation Installation and Operation Manual
3-2 Operating Instructions FOM-E3/ETH, FOM-T3/ETH Ver. 1.0
3.2 Operating Instructions
Turning On
FOM-E3/ETH and FOM-T3/ETH start operating as soon as they are connected to
the power source. The PWR LED turns ON and remains lit as long as the units are
connected to the mains.
Normal Operating Instructions
The following LEDs conditions are observed during the normal operation:
• PWR is ON.
• LINK and ACT are ON to indicate data transfer over the Ethernet link.
• ETH 100 turns ON when FOM-E3/ETH and FOM-T3/ETH operate in Fast
Ethernet (100 Mbps) mode.
The rest of the front panel LEDs are OFF.
Turning Off
Turn FOM-E3/ETH and FOM-T3/ETH off by disconnecting the power cord from the
mains.