Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
FOM-E3/ETH, FOM-T3/ETH Ver. 1.0 Installation and Setup 2-7
Connecting the AC Power
AC power should be supplied to FOM-E3/ETH and FOM-T3/ETH through the
1.5m (5 ft) standard power cable terminated by a standard 3-prong plug
(see
Figure 2-3 ). The cable is provided with the unit.
 To connect AC power:
• Connect the power cable first to the connector on the FOM-E3/ETH or
FOM-T3/ETH rear panel, and then to the mains outlet.
FOM-E3/ETH and FOM-T3/ETH will be turned on automatically upon
connection to the mains.
Connecting the DC Power
 To connect DC power:
• Refer to the DC power supply connection supplement for instructions how to
wire the DC cables. The DC supplement is provided on the technical
documentation CD supplied with the unit.