Specifications

Installation and Operation Manual Chapter 6 Diagnostics and Troubleshooting
RICi-E3, RICi-T3 Ver. 1.0 Handling Alarms 6-5
6.2 Handling Alarms
Alarms are viewed in the log file.
Viewing Alarms
Table 6-4 lists the event types that appear in the log file. The Log File screen is
accessible from the System menu:
Main Menu > Monitoring > System > Log File
Table 6-4. Event List
Code Event Description
10 LINK_UP Network Ethernet port has been connected
20 LINK_DOWN Network Ethernet port has been disconnected
30 HW_FAILURE Hardware failure has been detected
40 SNMP_AUTH_FAIL SNMP Authentication Failure trap has been
received
50 WEB_START ConfiguRAD session has been initiated
51 WEB_FINISH ConfiguRAD session has been finished
52 WEB_FAILURE ConfiguRAD session has failed
60 TELNET_START Telnet session has been initiated
61 TELNET_FINISH Telnet session has been finished
62 TELNET_FAILURE Telnet session has failed
70 TFTP_START TFTP session has been initiated
71 TFTP_FINISH TFTP session has been finished
72 TFTP_FAILURE TFTP session has failed
Clearing Log File
 To clear the log file:
• In the Log File screen, press <X>.