Specifications
Installation and Operation Manual Chapter 4 Configuration
RICi-E3, RICi-T3 Ver. 1.0 Additional Tasks 4-25
3. From the File Transfer menu, perform the following:
Select Server IP Address, and enter the IP address of the TFTP server.
Select Remote File Name, and enter a file name as explained below.
For downloading, assign a name to the file, which is to be
downloaded to RICi-E3, RICi-T3.
For uploading, specify a name, under which the file is going to be
saved on the remote server.
Select File Type, and choose whether you intend to transfer a software
(IMG) or configuration (Configuration) file.
Select Save to save the changes.
Select Command to start the desired procedure:
Upload – saving a software or configuration file on a remote server.
Download – transferring a software or configuration file to
RICi-E3, RICi-T3.
RICi-E3, RICi-T3 starts file transfer.
The TFTP file transfer process is logged by the following system messages, which
are stored in the log file. For additional information, refer to
Chapter 5
:
• TFTP – Starting Upload
• TFTP – Starting Download
• TFTP – Upload Failed
• TFTP – Download Failed.