Specifications

Chapter 4 Configuration Installation and Operation Manual
4-18 Additional Tasks RICi-E3, RICi-T3 Ver. 1.0
Configuring the QoS Priorities
RICi-E3, RICi-T3 supports three different traffic queues. These traffic queues can
be assigned to different priority levels, according to the level of service
represented by each queue. There are eight priority levels (0 – 7).
 To assign the traffic queues to priority levels:
1. Navigate to Main Menu > Configuration > Application > QoS
The QoS menu appears as illustrated in
Figure 4-16 .
RICi-E3, RICi-T3
Configuration>Applications>QoS
1. User Priority 0 > <Traffic Class 2>
2. User Priority 1 > <Traffic Class 2>
3. User Priority 2 > <Traffic Class 1>
4. User Priority 3 > <Traffic Class 1>
5. User Priority 4 > <Traffic Class 1>
6. User Priority 5 > <Traffic Class 0>
7. User Priority 6 > <Traffic Class 0>
8. User Priority 7 > <Traffic Class 0>
>
‘0’ is the Highest Traffic Class
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-16. QoS Menu
2. From the QoS menu, select the desired priority (0 – 7) and enter the
assigned traffic queue number (0 – 2). Each traffic queue can be assigned to
more than one priority.
3. Repeat the previous steps for all priorities.
4. Select Save.