Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-E3, RICi-T3 Ver. 1.0 Configuring for Operation 4-17
 To clear the MAC table:
1. In the Static MAC Table, press <X>.
RICi-E3, RICi-T3 displays the following message: Are you sure (Y/N)?
2. Press <Y> to confirm your request.
Configuring the Bridge Port
 To configure the bridge port:
1. From the Bridge menu, select Bridge Port.
The Bridge Port menu appears as illustrated in
Figure 4-15 .
RICi-E3, RICi-T3
Configuration>Applications>Bridge>Bridge Port (user)
1. Vlan Tag Stacking (Disable)
2. Port VID/Stacking VID [1 – 4094] (1)
3. Copy Origin Priority (Disable)
4. Default Priority [0 – 7] (0)
>
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-15. Bridge Port Menu
2. From the Bridge Port menu, configure the following:
 VLAN Tag Stacking
 Enabled – Double VLAN tagging at ingress is enabled
 Disabled – Double VLAN tagging at ingress is disabled
 PVID. To be assigned to frames that do not contain a VLAN ID
 Copy Origin Priority
 Enabled – Copying priority is enabled
 Disabled – Copying priority is disabled
 Default Priority. Specifies a default priority value to be assigned if no
other priority value is explicitly assigned
 0 - 7
3. Select Save to complete the bridge port configuration.