Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-E3, RICi-T3 Ver. 1.0 Configuring for Management 4-9
Configuring Control Port Parameters
RICi-E3, RICi-T3 embedded software enables you to configure the serial port
parameters, which include specifying terminal baud rate, and scrolling window
size.
The user-configurable size of the scrolling window specifies the height of the
area that is reserved for status information. This area is located at the bottom of
the screen.
The security timeout specifies a time interval after which RICi-E3, RICi-T3
automatically disconnects from the supervisory terminal if no input from the user
is detected. You may set the timeout to up to 60 seconds or disable it.
• The Baud Rate parameter is masked during Telnet and ConfiguRAD
management sessions.
• For Telnet or ConfiguRAD management, the security timeout is set to 10
minutes and cannot be modified.
Not
e