Specifications

Chapter 4 Configuration Installation and Operation Manual
4-8 Configuring for Management RICi-E3, RICi-T3 Ver. 1.0
Controlling the Management Access
You can enable or disable access to the RICi-E3, RICi-T3 management system via
SNMP, Telnet or Web-based applications. By disabling SNMP, Telnet or Web, you
prevent unauthorized access to the system when security of the RICi-E3, RICi-T3 IP
address has been compromised. When SNMP, Telnet and Web access are disabled,
you can only manage RICi-E3, RICi-T3 via an ASCII terminal connected to the Control
port.
 To define the management access method:
1. From the Management menu, select Management Access.
The Management Access menu appears as illustrated in
Figure 4-7 .
RICi-E3, RICi-T3
Configuration>System>Management>Management Access
1. User Access >
2. TELNET access > (Enable)
3. SNMP access > (Enable)
4. WEB access > (Enable)
>
ESC-prev menu; !-main menu; &-exit 1 user(s)
Figure 4-7. Management Access Menu
• During a Telnet session, Telnet Access is masked.
• During a SNMP session, SNMP Access is masked.
• During a Web session, Web Access is masked.
2. From the Management Access menu, select TELNET access to configure Telnet
access, select SNMP access to configure SNMP access, or select WEB access
to configure Web access.
3. Select Save.
Not
e