Specifications

Chapter 4 Configuration Installation and Operation Manual
4-6 Configuring for Management RICi-E3, RICi-T3 Ver. 1.0
RICi-E3, RICi-T3
Configuration>System> Management >Host IP
1. IP Address ... (0.0.0.0)
2. IP Mask ... (255.255.255.0)
3. Default gateway ... (0.0.0.0)
4. Read community ... (public)
5. Write community ... (private)
6. Trap community ... (public)
7. Host Tagging ... (Tagged)
8. Host VLAN ID [1-4094] ... (1)
9. Host VLAN priority [0-7] ... (0)
10. Physical Ports Access ... (Network port only)
>
ESC-prev menu; !-main menu; &-exit; 1 user(s)
Figure 4-4. Host IP Menu (Host Tagging selected)
Configuring the Network Managers
Define or modify the network managers to which the SNMP agent of RICi-E3,
RICi-T3 sends traps. Up to ten network managers can be defined. Entering the IP
address and corresponding subnet mask defines each manager. In addition, you
can temporarily prevent a network manager from receiving traps by masking the
network manager. Before editing the manager list, it is necessary to add at least
one network manager.
 To add a network manager:
1. From the Management menu, select Manager List.
The Manager List menu appears as illustrated in
Figure 4-5 .
RICi-E3, RICi-T3
Configuration>System>Management>Manager List
Manager ID Manager IP Manager IP Mask Manager Trap Mask
1. 1.1.1.1 255.255.255.0 Disable
2. 2.2.2.2 255.255.255.0 Disable
3. 3.3.3.3 255.255.255.0 Disable
4. 4.4.4.4 255.255.255.0 Disable
1. Change cell ....(1.1.1.1)
>
x – Clear Table
ESC-prev menu; !-main menu; &-exit; ?-help 1 user(s)
Figure 4-5. Manager List Menu
2. In the Manager List menu, press <A> to add a manager.
The Manager List menu switches to the Add mode as illustrated in
Figure 4-6 .