Specifications

Chapter 3 Operation Installation and Operation Manual
3-10 Configuration Alternatives RICi-E3, RICi-T3 Ver. 1.0
Logging In
 To log in from a Web browser:
1. Connect the Ethernet port to the LAN.
2. Verify that an IP address has been assigned to the relevant unit, using an
ASCII terminal.
3. Open the Web browser.
4. Disable any pop-up blocking software, such as Google Popup Blocker.
5. In the address field, enter the IP address of RICi-E3, RICi-T3 and then press
<Enter>. The address line reads something like http://172.16.100.253.
The Opening window appears.
6. Click LOGIN; you are asked for the user name and the password.
7. Enter your user name and the password. The default user name for
read/write permission is su and the default password is 1234.
The ConfiguRAD Main menu appears.
• It is recommended to change default passwords to prevent unauthorized
access to the unit.
• RICi-E3, RICi-T3 allows two management sessions to be active simultaneously:
one network session (Telnet, ConfiguRAD, RADview-Lite) and one ASCII
terminal session.
• If no user input is detected for 5 minutes during a ConfiguRAD session,
RICi-E3, RICi-T3 automatically disconnects from the management station.
Navigating the ConfiguRAD Menus
ConfiguRAD is a Web-based remote access terminal management software. It
provides a user-friendly interface for configuring, collecting statistics and
performing diagnostic tests on the RICi-E3, RICi-T3 units. Menus and available
options are identical to the ones available using Telnet or an ASCII terminal.
At the left-hand bottom corner, ConfiguRAD are the auxiliary management tools:
• Status. Shows the number of users currently managing RICi-E3, RICi-T3
• Trace. Opens an additional pane for system messages, progress indicators
such as ping, software and configuration file downloads, and alarms. It is
recommended to keep the trace pane open all the time.
• Refresh All. Refreshes performance registers.
 To choose an option:
1. Click a link in the ConfiguRAD screen to display the next menu.
2. Once the target screen appears, select a value from the drop-down list or
enter it in into a text field.
Notes