Instruction manual

Chapter 2 Installation and Setup RIC-E3/ETH, RIC-T3/ETH Installation and Operation Manual
2-8 Installation and Setup
Connecting the AC Power
AC power should be supplied to RIC-E3/ETH and RIC-E3/ETH through the 1.5m
(5 ft) standard power cable terminated by a standard 3-prong plug (see Figure 2-5).
The cable is provided with the unit.

To connect AC power:
• Connect the power cable first to the connector on the RIC-E3/ETH or
RIC-E3/ETH rear panel, and then to the mains outlet.
RIC-E3/ETH and RIC-E3/ETH will be turned on automatically upon
connection to the mains.
Connecting the DC Power

To connect DC power:
• Refer to DC Power Supply Connection Supplement.