User guide

Quantity One User Guide
17-12
Naming/Saving a Count
Enter a name for the count you want to save in the Count Name field, or use
the default name (the file name plus a time stamp). Enter any comments in
the Count Comment field. This data will be included in the spreadsheet.
To save the currently displayed count to the batch file, click on the Save Count
button. The number of colonies, as well as associated count settings, will be
added to the spreadsheet. After you have saved the current count, the Save
Count button will become deactivated. If you adjust the count in any way, the
button will become active again and you can add your adjusted count to the
spreadsheet.
Loading Another Image
After you have saved the count(s) for the current image, you can open
another dish image by clicking on the Load Next button. This will open a
standard Open dialog box from which you can select the image.
The new image will be loaded into the Colony Counting control panel.
Note: The image will only be loaded into the Colony Counting control panel; it
will not open in a separate image window in Quantity One.
After you have saved the count(s) for the new image to the batch file, you can
either load another image using the Load Next command or click on Close to
close the Colony Counting control panel.