User guide

Quantity One User Guide
15-8
click on the band to be assigned the standard value. The subsequent bands in
the lane will be numbered sequentially based on the initial assignment.
Fig. 15-8. Applying standard values.
After you have applied the standard values to a lane, the bands in that lane
will change color to blue, indicating that they are now standards.
You are now ready to select the standards regression curve to use for
calculating your unknowns.
Removing Standard Values from Lanes
The Clear from Lane button removes all the standard values from the lane(s)
you select. Click on the button, then click on the lane or lanes from which you
want to delete the standard values.
Showing the Modeling Lines
After you have applied the standard values, you can show the modeling lines
for the standards by clicking on the Show Modeling Lines button. Bands that
fall along these lines will have the same values as the standards.
To redisplay only the band numbers with no modeling lines, click on the
Show Band Types button.
15.1.b Standards Regression Curve
After you have applied the standard values to the image, you are ready to
select the regression model to use to calculate the values of your unknown
Click here to apply
this standard value
to a particular band
on your image