User guide

Bands
14-19
Fig. 14-12. Band Information dialog box.
The Lane and Band number of the band you clicked on are listed at the top of
the dialog. Enter new numbers in these fields to display information and a
trace overlay for a different band.
If the band is part of a band set and is of a known band type, this will be
noted in the form.
The following information is listed for each band:
• Relative front—The distance of a band from the top of a defined lane to
the bottom, divided by the total length of the lane. This distance can be
determined either by measuring a vertical line from the top of the lane to
bottom or (if the lane is curved) by measuring along the length of the
lane. Select Edit > Preferences to set the preferred measuring method.