User guide

Quantity One User Guide
14-10
Fig. 14-5. Parameter set controls in the Detect Bands dialog box.
If you have not already entered a name for your parameter set in the
Parameter Set Name field, you will be prompted to do so.
Loading Parameters
To load a previously saved set of parameters, click on the Load button.
Select the parameter set that you wish to load from the list. The values of that
parameter set will be displayed in the Detect Bands form.
Deleting Parameters
To remove a set of parameters from your list, first load it, then press the
Delete button. A dialog box will ask you to confirm the deletion.
Resetting Parameters
To return all detection parameters to their default values, click on the Reset
button at the top of the form. Saved detection parameter files are not affected
by this action, and can be reloaded at any time.
14.3 Identifying and Editing Individual Bands
To manually identify and edit individual bands in your image, you can use
the Create, Adjust, and Remove Band commands on the Band menu and
Band Tools toolbar. (These are also available as buttons in the middle of the
Detect Bands dialog box.)