User guide

Lanes

13-19

Setting Array Cell Height and Width

Now you should adjust the cell brackets so that they completely enclose the

cells in the array.

Select Array Cell Height from the Lane > Lane-based Arrays submenu and

enter the height in millimeters of the array cells.

Fig. 13-18. Setting the array cell height.

When you click on OK, the cell brackets will adjust to the speciﬁed height. If

you aren’t sure of the exact height, you can experiment with different values.

Select Array Cell Width and enter the width in millimeters of all the cells in

the array.

Fig. 13-19. Setting the array cell width.

When you click on OK, the cell brackets will adjust to the speciﬁed width. If

you aren’t sure of the exact width, you can experiment with different values.