User guide

Quantity One User Guide
13-8
13.1.e Unadjusting Single Lanes
You can undo any of your lane adjustments with the Unadjust Lane
command. Select Unadjust Lane from the menu or toolbar, then click on an
anchor point you created to remove it. If you remove the anchor points at
either end of the lane line, you will delete the line from the image.
13.1.f Deleting Lanes
You can delete both single lane lines and lanes from a lane frame.
Select Remove Lane from the Lane menu or toolbar and click on the lane you
want to remove. A pop-up box will ask you to confirm the deletion.
Note: If you delete a lane from a group of lanes or a frame, click on Edit > Sort
and Recalculate to renumber the remaining lanes.
13.1.g Lane Width
The Lane Width command allows you to adjust the width of a single lane.
Only the pixels within the sampling width are used for lane profiling and
data quantitation purposes.
Select Lane Width from the Lane menu or toolbar, then click on a lane. This
will open the Sample Width dialog box, displaying the current width of the
lane you clicked on.
Fig. 13-8. Sampling Width dialog box.
Enter a new width in millimeters and click on the OK button.