User guide

Lanes
13-5
Fig. 13-5. Edit Frame tools.
Adjusting the Entire Frame
The following commands are located on the Lane > Edit Frame submenu:
• To stretch the frame (e.g., if you want to include additional bands at the
top or bottom of the image), select Stretch Frame from the submenu and
drag an anchor point in or out. The opposite anchor point will remain
fixed while the frame expands or contracts.
• To move the entire frame to a new position, select Move Frame from the
Lane > Edit Frame submenu and drag an anchor point. The entire frame
will move.
• To rotate the frame, select Rotate Frame from the submenu and drag an
anchor point. The entire frame will rotate.
• To resize the frame, select Resize Frame from the submenu and drag an
anchor point in or out. The frame will expand or contract from the center.
Adding and Adjusting Anchors
After you have created a frame, the Add/Adjust Anchors function will
automatically be assigned to your mouse.
To adjust an individual corner anchor point of a frame, select Add/Adjust
Anchors (if it is not already assigned to your mouse) and drag the anchor
point. This will move both the anchor point and attached frame lines.
If the lanes are not straight or if the dye front smiles, you can create additional
anchor points within the frame to change the shapes of individual lines.