User guide

Introduction
1-11
PC
Fig. 1-6. PC Hardware Security Key
Before proceeding, please turn off your computer. If you have a printer
attached to your computer’s parallel port, please turn that off as well.
The HSK attaches to the parallel port on the back of your PC. If a printer cable
is attached to this port, disconnect it. After you have attached the HSK, you
can attach the printer cable to the key itself and restart your computer and
printer.
The code for the PC hardware security key is EYYCY. This is printed on the
key itself.
You will also need to install the system driver that allows the computer to
“read” the HSK.
Note: Windows NT and 2000 users must be in the local administrator group to
install the HSK driver.
To install the driver, click on your Windows Start menu and select Programs >
The Discovery Series. Select Install HASP Hardware Security Key driver to
begin installation.
Note: Windows 98 users must reboot their computer after installing the HSK.
Windows NT and 2000 users do not have to reboot.