User guide

Molecular Imager FX
11-7
Fig. 11-4. Creating a custom application.
To select a filter (including user-defined) or filter combination, click on the
buttons for Filters A, B, and C, and make your choice from each pop-up list.
Note: The user-defined filters (User1, User2, etc.) cannot be renamed in the pop-
up list, so be sure to remember which filter you insert into each position
in the FX.
To use an external laser, click on the Laser button and select it from the pop-
up list. Otherwise, use the default internal laser (532/1064nm).
Click on the PMT Voltage button to select a standard voltage for your custom
application or create a custom PMT voltage.
To select a custom voltage, click on the Custom option. In the dialog box,
adjust the slider to select a PMT voltage as a percentage of the maximum.