User guide

Quantity One User Guide
11-2
you have an older PC, you may also need to load the SCSI and WinASPI
drivers that came with your card.
Simulation Mode
Any of the imaging device acquisition windows can be opened in “simulation
mode.” In this mode, an acquisition window will open and the controls will
appear active, but instead of capturing real images, the window will create
“dummy” images of manufactured data.
You do not need to be connected to an imaging device to open a simulated
acquisition window. This is useful for demonstration purposes or practice
scans.
To enter simulation mode, hold down the CTRL key and select the name of the
device from the File menu. The title of the acquisition window will indicate
that it is simulated.
11.1 FX Acquisition Window
To acquire images using the FX, go to the File menu and select FX.... The
acquisition window for the imager will open, displaying the control panel for
the imager and the scanning area window.