User guide

Quantity One User Guide
1-6
RAM: 64 MB for Gel Doc, Chemi Doc, and Fluor-S imaging
systems. 128 MB for FX, Personal FX, and
densitometers.
Hard disk space: 3 GB. Recommended: Removable storage media (such
as an Iomega Jaz drive) or a network file server.
Monitor: 17" monitor, 1024 x 768 resolution, True Color (24- or
32-bit).
SCSI: Required for all Bio-Rad imaging devices except the
Gel Doc and Chemi Doc. Adaptec SCSI card with EZ-
SCSI software.
Printer: Optional.
Macintosh
Note: The default amount of memory assigned to this program on the
Macintosh is 64 MB. If the total RAM in your Macintosh is 64 MB or less
(the minimum recommended amount is 128 MB), you should reduce the
amount of memory assigned to the program to 10 MB less than your total
RAM. With the application icon selected, go to File > Get Info in your
Finder to reduce the memory requirements for the application. See your
Macintosh computer documentation for details.
The following are the minimum system requirements for installing and
running on a Macintosh:
Operating system: System 8.0 or higher.
Processor/Model: PowerPC Macintosh 9500.
RAM: 64 MB for Gel Doc, Chemi Doc, and Fluor-S imaging
systems. 128 MB for FX, Personal FX, and
densitometers.
Hard disk space: 3 GB. Recommended: Removable storage media (such
as an Iomega Jaz drive) or network file server.
Monitor: 17" monitor, 1024 x 768 resolution, Millions of colors
(24-bit).