User guide

Quantity One User Guide
6-14
After the scan is complete, a window will open displaying the scan image, at
which point you can analyze and save it.
Note: The image will open with a default file name that includes the date, time,
and (if applicable) user name. However, unless you have selected Auto
Save After Scan, the file will not be saved until you select Save or Save As
from the File menu.
6.7 Other Options
Oversample
This feature allows you to scan at the maximum resolution of the GS-710 (42.3
x 42.3 microns) and then use spatial averaging to create an image with lower
resolution. This can result in better images at lower resolution—however, it
takes longer to scan.
To turn on oversampling, click on the More Options button in the acquisition
window and click on the Oversample checkbox.
With oversampling on, you can specify your own resolution within the range
of 43–169 microns by entering values directly in the fields next to X resolution
and Y resolution in the main acquisition window.
Auto Save After Scan
To automatically save any scan you create, click on the Auto Save After Scan
checkbox.
With this checkbox selected, when you click on Acquire, a Save As dialog box
will open asking you to specify a file name and location for the image you are
about to create. The scan will begin when you click on the Save button.
Make Backup Copy
If you have checked Auto Save After Scan, you can also automatically create a
backup copy of any scan you create.