User guide

GS-710 Imaging Densitometer
6-3
Fig. 6-2. GS-710 acquisition window
The scanning window is marked by grid lines that divide the area into square
centimeters. These are numbered 1–29 top to bottom and 1–21 left to right if
the light source is reflective, and 1–23 top to bottom and 1–20 left to right if
the light source is transmissive (see below).
To hide the gridlines, click on the Hide Grid checkbox under Options.
Below the main scanning window is the calibration strip window. Every time
the densitometer calibrates, an image of the calibration strip will appear in
this window.