Specifications

Chapter 2 - Installation and Setup FLM-1 Installation & Operation Manual
2-8 Installation and Setup 16/01/01 11:12 AM
Warning
Before connecting power to the unit, verify that the socket outlet is
provided with a protective earth contact. If you are using an extension
cord (power cable) make sure it is grounded as well.
Interrupting the protective (grounding) conductor (inside or outside the
unit), or disconnecting the protective earth terminal can make this unit
dangerous.
Make sure that only fuses of the required rating, as marked on the rear
panel, are used for replacement. Do not use repaired fuses or
short-circuit the fuse holder. Always disconnect the mains cable before
removing or replacing the fuse. Whenever it is likely that the fuse
protection has been damaged, make the unit inoperative.
To connect power to FLM-1, simply insert its power cord into the power
socket.