Specifications

FLM-1 Installation & Operation Manual Chapter 2 - Installation and Setup
16/01/01 11:12 AM Installation and Setup 2-3
SELECT
6 OR 12
CHANNELS
12
32
J1
6
GND
NC
Figure 2-1 Strapping Diagram
Connecting the
Interfaces
Figure 2-2 to Figure 2-7 show the FLM-1 rear panel in all its versions,
containing different main link and subchannel connectors.
Figure 2-2 to Figure 2-4 show the FLM-1 versions with DB-25 subchannel
connectors and different main link connectors: terminal block, RJ-45, and
dual fiber.
Figure 2-5 to Figure 2-7 show the FLM-1 versions with RJ-45 subchannel
connectors and different main link connectors: terminal block, RJ-45, and
dual fiber.
CH 1/7 CH 2/8 CH 3/9
CH 4/10 CH 5/11 CH 6/12
MAIN CHANNEL
RX-B TX-BRX-A TX-A
11 5 VAC
0.2A T 250V
Figure 2-2 FLM-1/4W Rear Panel with a Terminal Block Main Link Connector
CH 1/7 CH 2/8 CH 3/9
CH 4/10 CH 5/11 CH 6/12
11 5 VAC
0.2A T 250V
MAIN CHANNEL
Figure 2-3 FLM-1/4W Rear Panel with an RJ-45 Main Link Connector
CH 1/7 CH 2/8 CH 3/9
CH 4/10 CH 5/11 CH 6/12
115 VAC
0.2A T 250V
MAIN CHANNEL
RX TX
Figure 2-4 FLM-1/DF Rear Panel with a DF Main Link Connector