Specifications

16/01/01 11:12 AM Package Contents 2-1
Chapter 2
Installation and Setup
2.1 Introduction
This chapter provides instructions for mechanical and electrical installation
of FLM-1.
Sections 2.2 and 2.3 describe site preparation for installation of FLM-1.
Section 2.4 describes mechanical and electrical installation, including strap
selection, setting the internal jumpers, connecting the main link and
subchannel interfaces and connecting the power.
After completing installation, refer to Chapter 3 for operating information
and system checkout to ensure proper operation.
2.2 Site Requirements and Prerequisites
Install FLM-1 within 1.5m (5 ft) of an easily accessible grounded AC outlet.
The outlet should be capable of furnishing the voltage in accordance with
the rated voltage of the unit.
Allow at least 90 cm (36 in) of frontal clearance for operating and
maintenance accessibility. Allow at least 10 cm (4 in) clearance at the rear of
the unit for signal lines and interface cables.
2.3 Package Contents
The FLM-1 package includes the following items:
• The FLM-1 unit
• The FLM-1 Installation and Operation Manual
• The AC power cord.