Installation guide

sionally. You can think of the RADX as an extension cord. You simply roll the cart (if that's what you're using)
into the room and connect the RAD on the cart to the RADX in the wall.
WARNING! The port to which the RADX is connected MUST be configured for a specific kind of RAD –
and you can only plug in that type of RAD. In other words, you'll need a RADX for each type of RAD you
plan to use as a portable device (in each specific location).
TIP: Because a RADX must be configured for a specific RAD model, we recommend that you label each
RADX in your system with the RAD model it can accept.
NOTE: The RADX has an XLR-style 8P8C modular jack in it—to help the audio guy distinguish between
the RADX and a standard CAT 5 Ethernet connection in the wall.
HAL SYSTEM DESIGN GUIDE
36