Installation guide

Selector
Allows the end user to make a selection from a list. Uses for a Selector control might include
selecting a music channel, a preset, a room combination, and so on.
Selector control
Allows the end user to make a selection from a list. Uses for a Selector control might include
selecting a music channel, a preset, a room combination, and so on.
static IP addresses
An IP address that does not change. Static IP addresses must be manually assigned to
devices.
subnet mask
An IP address has two components, the network address and the host address. A subnet
mask separates the IP address into the network and host addresses ([network][host])
T
Toggle
Allows the user to switch between two states — on or off. A common usage of a Toggle con-
trol is to mute/unmute audio. Another common usage is to activate/deactivate a preset.
Toggle control
Allows the user to switch between two states — on or off. A common usage of a Toggle con-
trol is to mute/unmute audio. Another common usage is to activate/deactivate a preset.
U
Upstream
Audio channels on the expansion bus that flow toward the HAL device.
HAL SYSTEM DESIGN GUIDE
185