Unit installation

Installation and Operation Manual Chapter 4 Configuration
FCD-E1 FCD-E1 Supervision Language 4-11
Table 4-3. Mnemonic Command Set Index
Mnemonic Purpose Explicit Command Format
CA Clear alarms stored in the FCD-E1 alarm buffer CLR ALM
CB1 Stop the BERT test on channel 1 CLR LP BERT CH1
CB2 Stop the BERT test on channel 2 CLR LP BERT CH2
CBS Stop the BER test on sublink CLR LP BERT SL
CI1 Deactivate remote inband-activated loopback on channel 1 CLR LP INBAND CH1
CI2 Deactivate remote inband-activated loopback on channel 2 CLR LP INBAND CH2
CIS Deactivate inband loopback on sublink CLR LP INBAND SL
CL1 Deactivate local loopback on channel 1 CLR LP LOC CH1
CL2 Deactivate local loopback on channel 2 CLR LP LOC CH2
CLAM Deactivate local analog loopback on the main link CLR LP LOC ANA ML
CLAS Deactivate local analog loopback on the sublink CLR LP LOC ANA SL
CLDM Deactivate local digital loopback on the main link CLR LP LOC DIG ML
CLDS Deactivate local digital loopback on the sublink CLR LP LOC DIG SL
CM Display the main link clear loopback commands submenu, for
orientation in using the mnemonic commands
–
CR1 Deactivate remote loopback on channel 1 CLR LP REM CH1
CR2 Deactivate remote loopback on channel 2 CLR LP REM CH2
CRAM Deactivate remote analog loopback on the main link CLR LP REM ANA ML
CRAS Deactivate remote analog loopback on the sublink CLR LP REM ANA SL
CRDM Deactivate remote digital loopback on the main link CLR LP REM DIG ML
CRDS Deactivate remote digital loopback on the sublink CLR LP REM DIG SL
CS Display the sublink clear loopback commands submenu, for
orientation in using the mnemonic commands
–
C1 Display the channel 1 clear loopback commands submenu, for
orientation in using the mnemonic commands
–
C2 Display the channel 2 clear loopback commands submenu, for
orientation in using the mnemonic commands
–
D1 Configure the parameters of channel 1 DEF CH 1
D2 Configure the parameters of channel 2 DEF CH 2
DA Define the alarms to be masked (ignored) DEF ALARM MASK
DB Display the BER tests commands submenu, for orientation in
using the mnemonic commands
–
DB1 Define the type of test sequence to be used for BER testing on
channel 1
DEF BERT CH 1