Unit installation

Installation and Operation Manual Chapter 4 Configuration
FCD-E1 FCD-E1 Supervision Language 4-9
Table 4-2. Explicit Command Set Index (Cont.)
Command Purpose Options Mnemonic
DEF AGENT Define the SNMP agent configuration parameters DG
DEF ALM MASK Define the alarms to be masked (ignored) DA
DEF AR Control the use of traps for alarms reporting –
DEF BERT CH 1
DEF BERT CH 2
DEF BERT SL
Define the type of test sequence to be used for BER testing
on the corresponding data channel or sublink
DB1
DB2
DBS
DEF CALL Define the dial-out parameters for the dial-out port DC
DEF CH 1
DEF CH 2
Configure the parameters of the corresponding channel D1
D2
DEF DNLOAD ML Define the main link inband management parameters DDM
DEF DNLOAD SL Define the sublink inband management parameters DDS
DEF DP Define the parameters of the dial-out port DO
DEF MANAGER LIST Define or modify the network management stations to
which the SNMP agent of this FCD system will send traps
–
DEF ML Configure main link parameters DM
DEF NAME Define the logical name of the FCD-E1 DN
DEF NODE Define the node number of the FCD-E1 DX
DEF PWD Define a new password DW
DEF ROUTE Define the network management stations to be statistically
routed via the supervisory port
–
DEF SL Configure sublink parameters DS
DEF SP Configure supervisory port parameters DP
DEF SYS Configure system parameters DY
DEF TERM Reset the terminal control codes to 0 –
DEF TERM VE100
DEF TERM TV920
DEF TERM VT52
DEF TERM
FREEDOM/100
DEF TERM
FREEDOM/200
Select the control codes for one of the standard terminal
types
DT10
DT92
DT52
DTF1
DTF2
DSP AGENT SE
DSP ALM Display the contents of the alarm buffer and optionally clear
the buffer
/C
/CA
SA
DSP BERT CH 1
DSP BERT CH 2
DSP BERT SL
Display the results of the last BER measurement made on
the corresponding data channel or sublink
/I /R
/S /C
SB1
SB2
SBS