Unit installation

Chapter 3 Operation Installation and Operation Manual
3-12 Turning FCD-E1 Off FCD-E1
8. Repeat steps 3 through 6 until values are assigned to all the parameters in the
group; the second row shows the current selection.
9. Repeat steps 1 through 8 until values are assigned to all the parameters in the
desired groups; the second row shows the current selection.
10. After completing the configuration actions, you can use steps 1 and 2 to return
to the ALARM BUFFER; the top row shows: ALARM BUFFER.
If alarm messages are stored in the alarm buffer, ALARM BUFFER will be
automatically displayed if no pushbutton is pressed for one minute.
3.6 Turning FCD-E1 Off

To turn FCD-E1 off:
• If you have an AC version, set the FCD-E1 rear power switch to OFF.
• If you have a DC version, disconnect the power cord from the unit.