Unit installation

Installation and Operation Manual Chapter 2 Installation and Setup
FCD-E1 Connecting the Cables 2-19
AC Power Connection
AC power should be supplied to FCD-E1 through the 1.5m (5 ft) standard power
cable terminated by a standard 3-prong plug. The power cable is provided with
the unit.

To connect AC power to FCD-E1:
1. Check that the POWER switch on the FCD-E1 rear panel is set to OFF.
2. Connect the power cable to the power connector on the FCD-E1 rear panel.
3. Connect the power cable to the mains outlet.
DC Power Connection

To connect DC power to FCD-E1:
• Refer to the DC Power Connection Supplement.