Unit installation

Appendix E IR-ETH Interface Module Installation and Operation Manual
E-2 IR-ETH Interface Option FCD-E1
DECnet, XNS, ISO, and to operating systems, such as NetWare, VINES, and
3COM+.
Figure E-1 shows a typical application using an Ethernet interface bridge. Each
FCD-E1 unit is connected to an Ethernet network via the Ethernet Interface bridge.
FCD-E1
FCD-E1
E1 Network
Figure E-1. Typical Application of FCD-E1 with IR-ETH Module
E.2 IR-ETH Interface Option
Figure E-2 shows the rear panel of FCD-E1 with the IR-ETH interface option.
ERR
Figure E-2. IR-ETH Ethernet Bridge, 10BaseT Rear Panel
To connect the external equipment to the Ethernet interface, use standard
Ethernet cables with RJ-45 connectors.