Unit installation

Installation and Operation Manual Appendix D Command Language
FCD-E1 Supervisory Terminal Commands D-47
PASSWORD
Purpose
Enter the password when prompted to type the password upon the start of a
control session.
Syntax
PWD=<SP>‘password’
Use
When you see the prompt PASSWORD>, type:
PASSWORD= <SP>‘password’<Enter>
where ‘password’ is the string of four to eight alphanumeric characters that has
been defined by the user (or the default, RAD, as appropriate).
If you entered the correct password, you will see the FCD-E1 working prompt,
FCD>.
RESET
Purpose
Reset the FCD-E1 system.
Syntax
RESET
Use
To reset the FCD-E1, type:
RESET<Enter>
You are requested to confirm the operation.
TIME
Purpose
Set the time for the FCD-E1 internal clock.
Syntax
TIME
Use
1. To set the FCD-E1 internal clock time, type:
TIME<Enter>
You will see the first line of the FCD-E1 time entry form:
HOUR = 14
2. Use <F> or <B> to change the hour and press <Enter> to see the next line.